- DAWs >Sonar / Cakewalk
Download page (Windows 64/32-bit VST/3, AAX Mac VST/3, AU, AAX) Togu Audio Line TAL-Tube. TAL’s lineup of freeware plug-ins is quite impressive, and their simple saturator comes with some pretty useful features. Four controls let you adjust input/output gain, the amount of drive, and by far the coolest feature – the dry/wet mix. Want to use some of the comprehensive FX plug-ins that REAPER provides, but stuck in another host? Haven't made the switch yet? Fear not - you can download ReaPlugs, a package of FX that includes many of the plug-ins that come with REAPER, for free!
Run your plug-ins at higher sample rates in Sonar.
The argument about whether people can tell the difference between the same audio played back at 44.1kHz and at a higher sample rate such as 96kHz has never really been resolved, although I’ve yet to meet anyone who can do so reliably under rigorous test conditions. However, under some circumstances, recording at a higher sample rate can give audibly superior sound quality. This isn’t a wine-tasting-type difference (“the sound is pert, yet unassuming”), but an obvious, audible effect.
However, the sample rate you work at can also make a difference with sounds generated ‘in the box’, for instance using a virtual instrument plug-in that synthesizes a sound, or distortion created by an amp simulator. In these cases, the basis for the improvement heard with high sample rates is eliminating ‘fold-over distortion’, otherwise known as ‘aliasing’. A digital system is only capable of accurately representing audio at frequencies lower than half the sampling rate: 22.05kHz, in a 44.1kHz project. If an algorithm within a plug-in tries to generate harmonic content above this ‘Nyquist limit’ — say, at 32kHz — then what is actually heard is not a 32kHz tone but the ‘aliasing’ created when this tone is ‘folded down’ below the Nyquist limit (to 12.1kHz, in this case). Aliasing thus appears within the audible range, but is harmonically unrelated to the original signal, and generally sounds ugly.
This ‘fold-down distortion’ can happen with synthesized waveforms that are rich in harmonics, as well as with non-linear processing. Although your amp-sim harmonics may be weak, if you’re applying 60dB of gain to create overdrive or distortion, harmonics can often be strong enough to cause audible aliasing. Synthesizer waveforms with sharp rise and fall times, like pulse waves, can also be problematic, and even limiters can cause issues.
However, not all plug-ins will exhibit these problems, for one of four reasons:
- The audio coming out of them isn’t rich enough in harmonics to cause audible aliasing.
- The plug-in itself can oversample, which simply means that as far as the plug-in is concerned, the sample rate is higher than that of the project. As a result, any fold-over distortion occurs outside the audio range.
- The project sample rate is high enough to provide the same kind of environment as oversampling.
- The plug-in designers have built appropriate anti-alias filtering in to the algorithms.
Many modern virtual instruments and amp sims oversample, and DAWs can handle higher sample rates, so you’d think that might be the end of it. Unfortunately, there can be limitations with oversampling and higher project sample rates.
First, recording an entire project at a higher sample rate stresses out your computer more, reduces the number of audio channels you can stream, and won’t allow you to run as many plug-ins. Second, oversampling requires more CPU power, so even if all your instruments are oversampling internally, you may not be able to use as many instances of them. Finally, although some instruments may perform 2x oversampling, that may still not be sufficient to eliminate aliasing on harmonically rich sources.
Furthermore, with plug-ins that oversample, the sound quality will be influenced by the quality of the sample-rate conversion algorithms. It’s not necessarily easy to perform high-quality sample-rate conversion: check out comparisons for various DAWs at http://src.infinitewave.ca (where, incidentally, Sonar rates as one of the best), and remember that the conversion algorithms for a plug-in might be more ‘relaxed’ than what’s used in a DAW.
Upsampling to higher sample rates can let you retain some of the CPU efficiencies of running at a lower sample rate while reaping the benefits of recording at higher sample rates.
Sonar’s Solution
Paradoxically, I found out the extent to which recording some virtual instruments at higher sample rates produced superior sound quality while creating audio examples for a panel discussion at New York’s New Music Seminar — where my plan was originally to show that higher sample rates didn’t make a difference! Oops. After that, whenever appropriate I got into the habit of upsampling prior to rendering (as described in the ‘Upsampling’ box, below), particularly when using amp simulators.
However, I then asked Noel Borthwick, Cakewalk’s Chief Technical Officer, whether it would be possible to automate the process so I didn’t have to export, import, close projects, create new projects, and so on. He came up with a practical implementation that upsamples when rendering (or bouncing, exporting or freezing), and which does so transparently, in the background. The only way you’ll notice upsampling is happening is that rendering takes a little longer than usual.
The way it works is that, when you choose to render, Sonar sample-rate converts the file to a higher sample rate, renders the audio, then downsamples it back as audio to the project sample rate. The process works with VST 2, VST 3 and DirectX plug-ins.
The FX button in a plug-in’s upper-left corner accesses a menu where you can choose Upsample On Render and/or Upsample On Playback for a given plug-in. This setting persists in all projects for all instances of that particular plug-in, meaning that if you find a plug-in that benefits from upsampling, you need designate it for upsampling only once.
Furthermore, there’s a global upsampling enable/bypass button in the Control Bar’s Mix module for plug-ins that already have upsampling enabled.
Upsampling is set on a per-plug-in basis, and there’s also a Control Bar button that allows global enabling/disabling of all plug-ins that are set to upsample.
What’s The Catch?
This process begs the question of whether you lose the benefits of upsampling when you later convert the sample rate back down to 44.1kHz. The answer is that it shouldn’t: all properly designed sample-rate converters include an anti-alias filter precisely to avoid this problem, and, as we have seen, the sample-rate conversion within Sonar is of a high quality, so this shouldn’t happen. Note, though, that upsampling can’t fix audio that already has aliasing distortion; upsampling audio that already contains fold-over distortion to 96kHz will simply reproduce the existing distortion. Similarly, it’s unlikely that upsampling something recorded via a computer’s audio interface will yield any benefits in and of itself, because the audio interface itself will have already band-limited the signal’s frequency range.
Final Thoughts
Finally, it’s important to note that upsampling isn’t a panacea, though it shouldn’t be dismissed either. Even with synths that don’t oversample, upsampling may make no audible difference. However, sometimes synths that do oversample still benefit from upsampling; with some sounds, it can take 4x or even 8x oversampling to reproduce the sound accurately, and the improvement can be dramatic. And, in Sonar, you can set a plug-in to oversample at more than the default rate of 2x the project sample rate by editing Sonar’s AUD.INI file. For details on how to do this, consult Sonar’s help files on upsampling.
Upsampling In Older Versions Of Sonar
Selecting BWF import and export simplifies upsampling if you don’t have June 2015 or a later version of Sonar.
For those using a version of Sonar older than June 2015, here’s how to obtain the same results as Upsample On Render, which was introduced in October 2015 (unfortunately Upsample On Playback is not available on older versions). We’ll assume a 44.1 kHz project sampling rate.
For virtual instruments or audio tracks (such as a track being processed by an amp sim):
1. Save the virtual instrument or amp sim preset so you can call it up in step 5.
2. Slip-edit the MIDI clip driving the virtual instrument, or the audio clip being processed by the amp sim, so that it starts at the beginning of the project.
3. Export the MIDI or audio clip, then close the existing project.
4. Create a new project at a higher sample rate such as 88.2 or 96 kHz.
5. Insert the virtual instrument or amp sim you used previously, and then load its preset.
6. Import either the MIDI or audio clip.
7. Select All, then choose Tracks / Bounce To Track(s). You now have an audio track with either the virtual instrument or amp sim sound, rendered at the higher sample rate.
8. Export the audio track, then close the new project.
Uhe zebralette free vst. 9. Open the original project and import the rendered audio track. Sonar will automatically sample-rate convert it to the original project’s 44.1kHz sample rate.
Note that for audio tracks, you can omit step 2 if, under Edit / Preferences / File / Audio Data, you tick ‘Always Import Broadcast Waves At Their Timestamp’ and ‘Export Broadcast Waves By Default’ prior to exporting or importing any files. A Broadcast Wave File time-stamps the audio so it imports to the correct place on the timeline.
You may face several scenarios while mixing and mastering which may include the use of an equalizer, having a transparent display to analyze what you are adding or subtracting with the EQ, multiple EQ bands, and proper CPU usage is what to look for in an EQ.
But with that said every piece of software and hardware alike creates and outputs a slightly different sound meaning they all have unique timbres and uses. Alongside that, there are some rather expensive plugins we may see online, which aren’t out of our reaches but we don’t know what we need until we need it right? Well, this is why its best to try some free EQ’s first to see what it is you like within an EQ and what it maybe you are looking for.
We become ever so comfortable with our stock plugins, they do the simple tasks for us (sometimes), they don’t run our computer into the ground, and they for sure are pretty basic. Well, this is the issue most people come to, they want a better EQ, or they want a change of visuals.
EQ History – ‘The first EQ was first used by John Volkman working at RCA in the 1920s”
- The 15 Best Delay Plugins For Mixing (VST, AU, AAX)
- 10 Best Noise Gate Plugins (VST, AU, AAX)
- What Are The Best Tools To Develop VST Plugins & How Are They Made?
- 37 Best Free Vst Compressor Plugins For Mixing & Mastering
- DDMF Colour EQ info & download
- SPL Free Ranger info & download
- Analog Obsession STEQ v2 info & download
- TDR Nova Parallel Dynamic Equalizer info & download
- Cockos ReaEQ info & download
- Blue Cat’s Triple EQ info & download
- Analog Obsession Merica info & download
- TinyQ lkjb info & download
- Sonimus SonEQ info & download
- Ignite Amps PTEq-X info & download
- Leftover Lasagne Pushtec 5+1A EQ info & download
- lkjb QRange info & download
- TDR Slick EQ info & download
- Manda Audio 7Q info & download
- Mellowmuse EQ1A info & download
- Voxengo Marvel GEQ info & download
- Kuassa BASIQ info & download
More Info & Download
Specifications:
- 64-bit processing
- Low-CPU Usage
- Customizable GUI
- Great warm sound
- 5 Bands
- Resizable Window
Features & When To Use:
Colour EQ is a 64-bit EQ plugin that offers 5 ”super parametric” bands to manipulate the frequency range. This is exceedingly handy when wanting to use more than one band in one instance; the intuitive gain knobs on the five bands allow for perfect mixing of these bands when mixing and mastering.
Using the two different types of curves, Colour EQ offers a warm sound that you just wouldn’t get from your stock EQ.
Having a bright visual display helps you to craft and mould your bands to preference.
A great way to use this plugin is when you are not getting enough warmth in your low, mid/mids, Colour EQ will add a great sense of warmth throughout the selected bands. Another cool way to use this plugin is to use two different setups with two different curve types; you can use modified versions of the EQ for selected times in your mixdowns to add the feeling of a change in energy in a breakdown or drop.
Colour EQ is a great tool to have in your arsenal for mixing and mastering, plus you may find many uses in your day-to-day production.
Compatibility:
Windows VST (32/64 bit), Windows/Mac RTAS, and Mac VST/AU format (Intel, OSX 10.5 and higher)
More Info & Download
Specifications:
- Four useful bands
- Volume knob
- Great sound
- Four buttons to switch between EQ settings
Features & When To Use:
With a sleek, minimalistic design Free Ranger is a powerful EQ.
With a mid-band (150Hz – 7kHz), fixed high (10kHz), low shelf (80Hz) SPL have kept things very simple so anyone can EQ with ease.
Free Ranger gives the feel of the world-renowned API 560 EQ but offers this all for free!
Free Ranger is a bodybuilder for your sounds while mixing and a gentle touch when mastering, this plugin makes EQing fun, quick and easy.
You may find yourself using the four different EQ settings and incorporate them into your mixdowns. Using them to create different feels and vibes can give your masters that final touch you’ve been looking for.
This is a must-have!
Compatibility:
macOS 10.9 through 10.15, Windows 7-10
More Info & Download
Specifications:
- mid-band (150Hz – 7kHz)
- fixed high (10kHz)
- low shelf (80Hz)
- Optical compressor knob
- Added preamp
Features & When To Use:
Simplicity is key with EQ work in the mix or master, and this plugin keeps that in mind through and through.
With a very easy to use GUI STEQ 2 has a powerful but simple way of delivering a small form factor EQ to your DAW.
This EQ gives off old school retro vibe, precise, clean, and adds a lot of detail to the mid-range.
STEQ 2 is excellent for tonal rebalancing due to the broadness of the three bands creating a pure blend between the frequency ranges.
Using this to add punch to claps and snares is also a good use. But be careful when adding to full bus groups.
This EQ from Analog Obsession is an excellent tool to keep at your disposal when thinking about doing some tasks during your mix, or why not change up those stock plugins for free.
Compatibility
WiN, OSX AU VST, VST3
More Info & Download
Specifications:
Great for:
Features & When To Use:
Nova is a parallel dynamic EQ; each band has a dedicated, dynamic section giving the user full flexibility.
Giving the option to drag and move bands in the visual GUI individually or group, this provides a natural form factor way to get results.
Using the multiband compression built into Nova your be able to manipulate your EQ even further, this will be displayed in the visual GUI with real-time feedback of the compression process. (subtly decrease the threshold to hear the difference)
In mix and mastering, you can use Nova to visually see where you may have audio issues to fix and makes it very easy to apply these changes with the drag and change feature.
The dynamic EQ is a handy tool to have in practice when mixing down full compositions – use it to bring down or up frequencies only when they reach a specific volume.
Nova is a heavyweight EQ with a lot under the hood all for free!
Compatibility:
Win XP SP2 or above, Mac OS X 10.7 or above.
More Info & Download
Specifications:
- Low CPU & RAM
- Fast and highly configurable
- Portable – copy & run
- Resizeable GUI
Features & When To Use:
ReaEQ may look basic, but under the hood, there is a lot to offer.
Being able to have as many bands as you wish is a massive bonus, you also have the ability to change all of these bands to one of the following (shelves, bands, LPF, HPF, notch, bandpass, allpass).
With a stripped-back GUI, it keeps you focused on the task at hand, not over complicating things but giving you the power of an audio god at your fingertips.
With a tremendous real-time visual display, this gives you the eyes and ear focus that you need when EQ in the mix.
Phasing is a big issue when mixing, ReaEQ gives you a ‘Show Phase’ button which will show you in your display what frequencies are being affected by the band. /best-vst-plugins-free-2017.html.
When mastering you may wish to keep all bands in one EQ patch, with ReaEQ you can do this.
Stripped back and powerful ReaEQ is a favorite among many producers across a wide range of genres.
Compatibility:
WIN 32, WIN 64
More Info & Download
Specifications:
- Semi-parametric EQ
- +/- 40dB Range per band
- MIDI control and automation support
- Real-time display
- All sample rates supported
Features & When To Use:
The Triple EQ is a three-band semi-parametric equaliser.
With a simple and easy to read visual display of the frequencies in real-time, you will have a clear display of the EQ in front of your eyes.
Alongside the huge +/- 40 dB range, Triple EQ has a bandwidth of .01 to 5 Octaves!
An exciting feature with Triple EQ is that you can link two bands together using the ‘Link Channels’ feature. This will allow you to use them in unison; combine this with the automaton support to create quick and easy modulation. This is a great way to change an EQ while in the mix with complex automation.
Using the linking feature to create movement and progression within your mixdowns makes Triple EQ a threat.
Fully customisable shapes make this a different tool when deep in the mix or master, you will find many uses for the dynamic bands you can create—having dynamic bands that you are able to manipulate helps when visually your EQ and how it may affect the whole frequency range.
Check this one out for a small form factor powerful EQ!
Compatibility:
Windows 7 to 10, Mac OS 10.7 or newer.
- 29 Best Sound Design VST Plugins In 2020
- 10 Best Opto Compressor Plugins (VST,AU,AAX) For Transparent Sound
- 11 Best Granulizer Plugins 2020 For a Future Sound Design
- 33 Best Waves Plugins of 2020 (Mixing & Mastering)
- Difference Between Active EQ, Passive EQ and Dynamic EQ
More Info & Download
Specifications:
- Low & High Band – Shelf
- Mid Band – Proportional Q Peak
- HP & LP Filter – Constant
- Low CPU usage
Features & When To Use:
We have another FREE plugin from Analog Obsession!
This time is bringing you Merica an emulation of the API 550A console equaliser.
A simple three-band EQ delivers a lot of power to your mixes and masters. Selectively choose which frequency your band boosts or cuts with the option to the right of the knobs.
All bands kept simple and easy to get to grips with.
Meica also has a nifty and very much needed output knob, there will be no issues with clipping in the digital domain when mastering with this plugin.
A larger than appearing sound Merica is an excellent EQ plugin to use when in the mixdowns and masters.
Given that the EQ it emulates is an industry-standard plugin this small form, powerful, easy to use, and was coded by one man! Merica is a must grab for all audio creatives looking to upgrade their stock EQ plugins.
Compatibility:
VST Win, VST3 Win, VST Mac, VST3 Mac, AU Mac
More Info & Download
Specifications:
- Four bands (20 Hz to 20 kHz)
- Small form factor (ability to make larger if wanted)
- High & Low cuts range is 6 and 48 dB/octave
- Included frequency analyser
Features & When To Use:
TinyQ is a small form factor EQ.
Giving the user a stripped-back interface TinyQ offers a solution to a simple job.
Having too many settings can become overwhelming; TinyQ does what it says on the tin and doesn’t make your job any harder.
Keeping things simple when mixing down whole groups is essential – finding yourself using CPU heavy EQ, or a stock plugin just might not cut it for you. TinyEQ is excellent for doing those necessary but straightforward EQ tasks!
With the recent addition of built-in frequency analyzer, it makes EQ even easier when getting stuck into your mixes or masters.
Create awesome sounding band curves.
Great emphasis on keeping things simple goes a long way with TinyQ; the team has made a great EQ that does everything it needs to in one small package. With four bands plus high pass/low pass filters, you won’t be looking any further for your day to day EQ needs.
Compatibility:
Windows 7 or later, macOS 10.7 or later (both 64 bit)
More Info & Download
- Three-band Equalizer, Low, Mid, High.
- 2 Musical Filters, High-Pass Low-Pass.
- Preamp stage with a bass booster.
- 64-bit floating-point precision.
- Up to 192kHz sample rates supported.
Features & When To Use:
SonEQ has 3 bands, low (20 Hz – 100 Hz), mid (150 Hz – 4 kHz), high (6 kHz – 15 kHz). Combined with a high pass and low pass filter, plus a ‘Mid-high Q’ this means when it’s on your band its narrow and when deactivated will cause it to be wider. This indicated by the red light.
Giving the user a lot of ways to EQ but keeping things user-friendly is what SonEQ does best.
Having the volume meter is very hand when mixing with any EQ, it gives the visual display of when things are getting a bit heated for your output.
SonEQ also gives you the full control of your input and output levels. This comes in handy when you are mixing your tracks with heavy effects, causing the overall levels to become louder than 0.0dB; this is where adjusting both the input and output parameters will solve the issue.
With this plugin being free for all to use we don’t see any reason why this shouldn’t be ready to deploy at the click of a finger, whether it’s beefing up the mix with the built-in bass boost preamp staging or adding a touch of colour to the highs this plugin has you covered.
Compatibility:
Mac OSX 10.6 or newer – Windows XP or newer
More Info & Download
Specifications:
- Three equalisation modules
- Stereo/Mono switching
- Four different tube types
- Global input/output level control
Features & When To Use:
PTEq-X is a digital emulation of three famous vintage EQ.
Equipped with three EQ modules comprised of mid-range (2kHZ – 7 kHz), low-frequency (20Hz – 150Hz), high-frequency (3kHz – 16kHz).
Using the mid-range module, you can use the low, mid parameter (top left) to effect the lower mid frequencies. Alternatively use the high mid setting (top right) to cause-effect to these frequencies.
Moving down the EQ, we have our second module, which is PEQ1A EQ (Low & High). This comes with a bunch of parameters to mould your EQ patches perfectly to your source.
Finally, this is all topped off with the HL3C module; this is a low-cut accompanied by a high-cut.
You can also use the ‘Oversampling’ feature to reduce aliasing.
Use the “Tube” switch to apply or deactivate the tube amp.
Using the input and output levels will give you the ability to control any nasty peaks brought in or out of the EQ.
PTEq-X is a combination of some of the best analogue EQ’s to exist, plus its FREE!! We recommend this one for a great addition to your EQ arsenal.
Compatibility:
Windows 7 – 10 32 and 64 bit. OS X 10.7 64 bit
More Info & Download
Specifications:
- 6 Band mid-range EQ
- Presets built-in
- Algorithms based on famous analogue gear
- Designed for mixing and mastering
Features & When To Use:
Pushtec 5+1A is a versatile mid-range program EQ that has mixing and mastering at its heart.
This plugin offers six bands, all offering a fantastic sounding boost through all parameters.
A vast selection of plugins makes it easy for users to start with something super effective and tweak to their liking.
“B/W” stands for bandwidth, this allows you to tweak the selected band and adjust to your preference.
A friendly and straightforward GUI keeps this EQ a smaller form factor but with a lot of power. Being designed for mixing and mastering be assured that this plugin delivers best when applied to a whole group or a master channel.
Giving instant sparkle to a mix or a very much needed bass boost this FREE plugin has you covered!
Compatibility:
Win 7 or higher only
More Info & Download
Specifications:
- 12 bands
- peak, shelf and cut filter
- Cut filters (12, 24 and 48 dB/oct steepness)
- Stereo/Left/Right/Mid/Side routing for each band
- A global gain for loudness adjustments
- Resizable GUI
Features & When To Use:
QRange is a very straight forward, user friendly, and effective EQ for mixing and mastering.
Giving the user an intuitive click and drag feature makes EQ work easy and more controllable.
With a choice of twelve bands, there is excellent room for doing additive plus subtractive EQ all in one plugin patch. Each band has. Selection of up to five different types (peak, low-shelf, high-shelf, low cut, and high cut).
Built into the frequency spectrum, you have the power to change it to pre or post. ‘Pre’ will let you see what the frequency range looks likes before the EQ is applied, whereas ‘Post’ will allow you to see it after the EQ has taken effect.
Offering the ability to users to save and load their own presets makes it easy to bring back some of your favourite patches while working on a mix or master.
It has to be said lkjb QRange is a must-have FREE EQ plugin.
Compatibility:
Win 7 or higher, macOS 10.7 or higher
- The 6 Best Ring Modulator VST Plugins in 2020 KiloHearts, Melda
More Info & Download
Specifications:
- Semiparametric EQ layout
- Three bands combined with 18dB/Oct high-pass filter
- Four EQ models: “American”, “British”, “German” and “Soviet” with optional non-linearity
- Five output stages: “Linear”, “Silky”, “Mellow”, “Deep” and “Toasted”
- Saturation algorithms by VoS (“Stateful saturation”)
Features & When To Use:
TDR’s Slick EQ provides a recognizable analogue sound.
Using three bands that bring together four different EQ models.
Both low and high bands are coupled with a cut and bell feature allowing for comfortable band changing.
Auto gain estimates the gain change caused by the current EQ settings; this makes it great to compare your EQ setting during the mix. There is also an ‘EQ Sat’ button; this will activate the saturator which is very intelligently paired to your EQ bands. This will add harmonics when boosting and remain passive when cutting.
Being able to save your favourite EQ settings for a later mix or master can be done within the plugin. Coupled with a undo/redo button you never miss that sweet spot for your bands, alternatively set up two different EQs with the A/B switch.
Slick EQ gives a very stripped back interface meaning you don’t get caught up with the visuals when doing equalising, providing a focus on what your hearing. This EQ shouldn’t be overlooked, with great coding, algorithms, settings, and excellent sounding types SlickEQ delivers more than you would expect from a FREE plugin.
Compatibility:
Win 32 bit VST2, VST3, Win 64bit VST2, VST3, AAX
Mac VST2, VST3, AU, AAX 64 bit
More Info & Download
Specifications:
- Seven band EQ
- Highpass/lowpass
- Stereo/mono options
- Left/right options
- Output level
Features & When To Use:
Manda Audio brings us 7Q.
7Q is an emulation of the beloved ‘Classic EQ’ which became discontinued, the team came together and brought the community back a redesigned version.
7Q takes off all the fancy parts and gives you the bare basics; this is what gives this a place on our list. With 7Q giving you the ability to apply your EQ to the left or right or both channels, you can independently EQ both sides of the stereo field.
Each band can be additive or subtractive. Keeping easy to use format is what this plugin does best; it doesn’t over-complicate the task at hand but assists your needs along the way wether mix or master.
Low memory and CPU usage make it easy to have multiple instances in your projects without having your computer meltdown.
7Q is a nifty EQ that is awesome for giving your sounds a little crisp boost before running into your other plugins within the chain.
Compatibility:
Win VST 32/64 bit, AAX 32/64 bit
Mac VST, AU, AAX
More Info & Download
Specifications:
- HP: 10hz – 1khz / sweepable Q
- Low Shelf: 30hz – 500hz
- Low Mid: 70hz – 2khz / sweepable Q
- High Mid: 500hz – 6k / sweepable Q
- High Shelf: 1.5k – 18k
- Phase switch
- Output level
- 64-bit internal processing
- Formats: 64bit VST, VST3, AU and AAX
- Version: 3.2
- Legacy 32bit installers
Features & When To Use:
EQ1A is a FREE analog-style EQ with a clever algorithm giving you minimal phase coloration.
This plugin has initially been paid to use the plugin, but the developers have decided to give it to us all for FREE!
EQ1A allows you to use broad bands to shape your sounds or outputs in a clean, crisp and phase-corrected way.
Being able to save you presets within the plugin makes it very easy to pull back that EQ you made on the last mix. 4-band parametric equalizer with an additional HP filter with variable resonance gives a wide range of settings to play with while keeping everything simple and user friendly.
EQ1A does what it says on the tin for FREE!
Using this within mixing or mastering may help you when wanting to add a hefty highpass or when looking to give some warmth to your mid ranges.
It has to be said with a great look, and low CPU usage EQ1A is an excellent addition to your plugins.
Compatibility:
Win, Mac
More Info & Download
Specifications:
- 16-band graphic equalizing
- +/- 12 dB gain range per band
- Channel grouping
- Preset manager
- Contextual hint messages
- Freehand drawing mode
- Stereo and multi-channel processing
- Mid/side processing
- Undo/redo history
- All sample rates support
- Linear-phase equalizing
- Internal channel routing
- 64-bit floating-point processing
Features & When To Use:
Voxengo is notorious for doing some excellent free plugins.
This addition is the Marvel GEQ, which is a fifteen band linear phase EQ.
There is a routing tab that allows you to affect the signals mid/sides independently. (orange slides)
Also giving full independence to the mid/side output level, becoming very useful when mixing and mastering.
Bypass feature makes it simple to hear what your EQ is doing to your sound source. Alternatively, decide between two EQ setups with the A/B mode.
For quick EQ drawing, you can hold ‘Ctrl or Cmd’ and click across the EQ drawing in your fader settings with the click of a mouse.
Having a stripped back form factor with enough controls to complement your mixing tasks this plugin has to be our list today.
Compatibility:
VST Win, VST3 Win, VST Mac, VST3 Mac, AU Mac
More Info & Download
Specifications:
- Three-band EQ
- High, mid, low
- Presets tab
- Output level
- Very simple to use
Features & When To Use:
BASIQ is a three-band EQ.
It keeps in mind that EQ work for mixing and mastering doesn’t have to be a headache or over complicated.
BASIQ is a design similar to the classic ‘Baxandall Equalizer’ which is knowns for its natural-sounding shelves and HiFi quality responses.
Adding a smooth, gradual shimmer or warmth instead of a surgical sharpness is what BASIQ does best. Use on groups or a master chain to subtly but significantly add character with the turn of a knob.
With some added presets you be able to get a quick change in tone with the click of a button.
The small form factor makes this BASIQ a powerful tool to be used within the mix or master.
Compatibility:
Win, Mac, VST, AU, 64 bit
With all of that said, grabbing all 17 plugins wouldn’t do you any harm, but we want to break down our top 3 picks!
In our top spot, we have Colour EQ by DDMF.
This plugin brings so many features that you would expect from pay to use plugins but all for FREE! Another fresh point is that the curves you can create with this cannot be done on other EQ plugins, giving Colour EQ a versatile approach.
Low-CPU – Usage Customisable GUI – Great warm sound – 5 Bands
Vst Plugins For Fl Studio
Coming in second is Nova by TDR.
Free Trap Vst Plugins
Parametric, dynamic EQ, and multiband compression are all built into an excellent looking FREE plugin.
Nova has a built-in dynamic EQ parameter when mixing, and mastering using a dynamic EQ is crucial sometimes. Having this all in one plugin for free is hugely commendable to the team who developed this plugin!
Parametric equalization – Dynamic equalization – Frequency selective compression – Multi-band compression – Wideband compression
Oversampling Vst Plugins Plugin
And finally, our last top pick is ‘Triple’ by Blue Cat.
This awesome plugin has so many features you just wouldn’t expect a FREE plugin to have.
Vocal Vst Plugins Free Downloads
With a fresh interface and drag and click feature to make EQing even more natural Triple is a powerful EQ.
Semi-parametric EQ – +/- 40dB Range per band – MIDI control and automation support – Real-time display
Today we have covered a lot of great FREE EQs for mixing and mastering. Amazingly, we have developers putting out all of these plugins for producers/sound engineers to level out the playing field. As we have all seen these ‘not to name’ brands releasing rather expensive EQs that we just can’t fork out for, but with the way, music has progressed today in the digital domain it has become much more accessible for creatives to share their ideas and effects for free.
With that said, they all have their benefits and downsides, but with them all being free, there is no reason you can’t pick them up and use these in your mixes or masters today!